Digital sanitary low price electromagnetic flowmeter,sewage water
magnetic flowmeter electromagnetic water sensor DN80
Product Parameters
Items | VMG600 Electromagnetic flowmeter |
Nominal diameter | DN10-3000mm |
Pressure | 0.6~4.0MPa ( Special pressure customizable) |
Flow range | 0.1~15m/s |
Structural style | Integrated type , Split type , Insert type, Battery powered type |
Protection Class | IP65, IP68 optional |
Medium Conductivity | ≥20μs/cm |
Liner Material | PU, PTFE, CR, FPM, F46, PFA |
Accuracy | Indicated value ±0.5%, Optional values ±0.3% |
Electrode material | HB, HC, WC, 316L, Ti, Ta, Pt |
Connection | Flange Clamp Thread |
Signal output | Pulse / 4~20mA / RS485 / HART/Modbus |
Product Feature
VMG600 series electromagnetic flowmeter is manufactured using the
latest technology of contemporary electromagnetic flow, and has the following characteristics:
1. The measurement medium is not affected by the density,
viscosity, temperature, pressure and conductivity of the fluid
2. There are open flow parts in the measuring pipe, no pressure loss, and
low pitch is required for straight pipe. It is suitable for
sewage, mud and other complex conditions
3. Reasonable selection of electrode and lining material has good
corrosion resistance and wear resistance, and the operation of high-definition backlight
LCD is simple.
4. Full digital processing, strong anti-interference ability, reliable measurement, high precision,
flow measurement range up to 150:1, with self-test and diagnosis function 5.16 bit embedded microprocessor, RS485, Hart and MODBUS
digital communication signal output (optional)
How to order?
(A) How to choose Lining material?
Lining Material | Applications |
PTFE | Strong corrosive mediums such as strong acid and alkali-20 ~ 120℃ |
F46 | The same as PTFEApplicable in medium of low abrasion
-40 ~ 160℃ |
PFA | The same as F46.
Applicable in state of load pressure-40 ~ 160℃ |
Neoprene | Water, sewage and slurry, mineral serosity of low abrasion-20 ~ 60℃ |
PU | Applicable in mineral serosity, slurry and coal slurry of high
abrasion-20 ~ 60℃ |
(B) How to choose Electrode material?
Electrode Material | Applications |
SS316L | Applicable in water, sewage and corrosive mediums. |
Tungsten carbide | Applicable in mediums of no corrosive and low abrasion. |
Hastelloy B (HB) | Having strong resistance to hydrochloric acid of any consistance. |
Hastelloy C (HC) | Resistant to oxidable acid such as nitric acid, mixed acid etc. |
Titanium | Seawater, and kinds of chloride, hypochlorite salt, oxidable acid
etc. |
Tantalum (Ta) | Hydrofluoric acid, fuming sulfuric acid, alkali remaining chemicals
etc. |
Platinum-iridium | Chemical mediums except for aqua fortis, ammonium salt. |
Based on your application and working environment, you shall
provide us with the below details.
1. Pipe Diameter:
2. Nominal Pressure:
3. Lining Material:
4. Electrode Material:
5. Body Material:
6. Explosion Proof: Yes/No
7. Shell Protection:
8. Type: Integrated/Segregated
9. Power Supply:
10. Signal Output:
11. Communication:
12. Other requirements:
If you need more specification details, please get in touch with
us.
