VMG600 Electromagnetic flowmeter DN30,DN50,DN100,DN200,DN300
Product Parameters
Items | VMG600 Electromagnetic flowmeter |
Nominal diameter | DN10-3000mm |
Pressure | 0.6~4.0MPa ( Special pressure customizable) |
Flow range | 0.1~15m/s |
Structural style | Integrated type , Split type , Insert type, Battery powered type |
Protection Class | IP65, IP68 optional |
Medium Conductivity | ≥20μs/cm |
Liner Material | PU, PTFE, CR, FPM, F46, PFA |
Accuracy | Indicated value ±0.5%, Optional values ±0.3% |
Electrode material | HB, HC, WC, 316L, Ti, Ta, Pt |
Connection | Flange Clamp Thread |
Signal output | Pulse / 4~20mA / RS485 / HART/Modbus |
Product Feature
VMG600 series electromagnetic flowmeter is manufactured using the
latest technology of contemporary electromagnetic flow, and has
the following characteristics:
VMG600 series electromagnetic flowmeter is manufactured using the
latest technology of contemporary electromagnetic flow, and has
the following characteristics:
1. The measurement is not affected by changes in fluid density,
viscosity, temperature, pressure and conductivity.
2. The series is nominally DN3 – DN3000 (Below DN15, kindly contact
us for more details).
3. There are many options for sensor liners and electrode
materials.
4. The converter adopts novel excitation method, low power
consumption, stable zero point and high accuracy.
Flow range up to 1500: 1.
5. The converter can be integrated with the sensor or separate.
6. The converter adopts 16-bit high-performance microprocessor,
2x16LCD display, convenient parameter setting and reliable
programming.
7. The converter uses surface mount technology (SMT), with
self-test and self-diagnosis functions.
8. The rubber and polyurethane lining sensor are intrinsically
immersed structure.
9. Explosion-proof instruments can be used in corresponding
explosion-proof places.
10. The flowmeter is a two-way measurement system with three
totalizers: forward total, reverse total and difference total; it
can display forward and reverse flow and has multiple outputs:
current, pulse, digital Communication, HART.
How to order?
(A) How to choose Lining material?
Lining Material | Applications |
PTFE | Strong corrosive mediums such as strong acid and alkali-20 ~ 120℃ |
F46 | The same as PTFEApplicable in medium of low abrasion
-40 ~ 160℃ |
PFA | The same as F46.
Applicable in state of load pressure-40 ~ 160℃ |
Neoprene | Water, sewage and slurry, mineral serosity of low abrasion-20 ~ 60℃ |
PU | Applicable in mineral serosity, slurry and coal slurry of high
abrasion-20 ~ 60℃ |
(B) How to choose Electrode material?
Electrode Material | Applications |
SS316L | Applicable in water, sewage and corrosive mediums. |
Tungsten carbide | Applicable in mediums of no corrosive and low abrasion. |
Hastelloy B (HB) | Having strong resistance to hydrochloric acid of any consistance. |
Hastelloy C (HC) | Resistant to oxidable acid such as nitric acid, mixed acid etc. |
Titanium | Seawater, and kinds of chloride, hypochlorite salt, oxidable acid
etc. |
Tantalum (Ta) | Hydrofluoric acid, fuming sulfuric acid, alkali remaining chemicals
etc. |
Platinum-iridium | Chemical mediums except for aqua fortis, ammonium salt. |
Based on your application and working environment, you shall
provide us with the below details.
1. Pipe Diameter:
2. Nominal Pressure:
3. Lining Material:
4. Electrode Material:
5. Body Material:
6. Explosion Proof: Yes/No
7. Shell Protection:
8. Type: Integrated/Segregated
9. Power Supply:
10. Signal Output:
11. Communication:
12. Other requirements:
If you need more specification details, please get in touch with
us.
